Can you tile over existing tiles?

2/18/2016

You most definitely can tile over tiles. Tiling over existing tiles is a great way to save time, money and update your space.

One of the most frequently asked questions during bathroom renovations is - Can you tile over existing bathroom floor tiles or wall tiles? - Well, technically you can lay new tiles over existing tiles. However this method of tiling highly depends on the condition of the existing tiles.

Tiling over tiles is a great way to update and modernise the design of any space without the expense and hassle of removing existing tiles.

Tiling over tiles is a much cheaper process that lifting up existing tiles. It removes the need to hire specialist tools, machines or labour to remove existing tiles and adhesive.

However, while tiling over tiles is a great option to update the design of your space, it is not a solution for everyone.

Since you are renovating the floor tiles or wall tiles because they are worn out, damaged or out-dated, tiling over the existing tiles is generally not advisable. There are some conditions that exist that may prevent you from tiling over tiles. These include:

If your old tiles are loose, drummy, lifting, uneven or damaged

If your tiles are damaged or drummy, this means that any flooring or wall material placed on top of the existing tiles will have the same issues. Tiling over these inadequate tiles will just be covering the issues for a short period of time.

If the added height on top of the existing tiles impedes access or does not fit.

The height of new tiles on top of existing tiles can cause a height issue and possibly block doors or cupboards or result in a large step up from outside or into your wet areas. These issues can however be resolved by trimming doors, skirting and creating falls or ramps into areas that are of concern.

The adhesive for the new tiles may not stick as well to the existing tiles as a concrete bedding because of the humidity, movement or condition of the existing floor or wall tiles.

Nerang Tiles has provided some tips and tricks below to help you consider whether you wan to tile over your existing bathroom floor tiles or bathroom wall tiles.

Before you start

Materials Required
Special materials specifically designed for nontraditional surfaces are required when tiling over existing tiles.

If you are tiling over tiles that have a matt finish then the best adhesive to use would be any non slump, flexible tile adhesive that has a C2S2TE classification that can be installed in accordance with Australian Standard AS3958.1-2007.

If you are tiling over tiles that have a gloss finish then the approach is just slightly different. Before installing the tiles you will need to prime the existing surface of the tiles by using a specific tile primer that will need to be applied by a roller to the existing floor. Once the primer has dried then a rubber based modified adhesive can be applied.

Inspection
It is critical that you properly inspect the condition of the existing bathroom floor tiles or bathroom wall tiles because they are the foundation of your new tiling job. Any tiling job needs to be properly sealed and bond with its base. If your existing bathroom tiles are well laid, there are no hollow gaps underneath or humidity issues, then it should be okay to lay the new bathroom tiles.

To inspect and prepare the surface properly, you can check for cavities in the existing tiles by gently tapping on them with a rubber or wooden hammer to search for hollow sounds. These gaps or cavities are usually caused by the lack of adhesive between the existing tiles and the subflooring but can also be caused by movement in the surface.

Preparation
Make sure that the floor tiles and wall tiles are leveled, any spots that are elevated should be grinded down with a right angle grinder fixed with a masonry wheel.

Sand all the tiles with a belt or orbital sander to scratch out any surface glazes. This will create a rougher and more porous surface which will help the adhesive bond to the existing tiles.

Vacuum and clean the tiles with detergent and water to remove any grime, dirt, sealers and wax. Rinse the surface of the old tiles with clear water and let it dry.

Installation
After you have prepared the floor, all that is left is for you to glue your new tiles to the existing tiles in your bathroom floor and wall. Tilers recommend using a rubber based glue for this job. This will provide more flexibility as the ground and existing tiles move slightly throughout the seasons.

71 Comments

Showroom Opening Hours

Monday - Thursday	8:00 AM - 5:00 PM
Friday	8:00 AM - 4:30 PM
Saturday	8:30 AM - 12:00 PM
Sunday	CLOSED
Public Holidays	CLOSED

You'll be smiling, doing your tiling, when you shop at

Most awarded Queensland Tile Showroom

Experience the beauty and quality of Nerang Tiles - the leading tile supplier on the Gold Coast.

Our wide range of high-quality tiles, including mosaic, swimming pool, marble look, concrete look, hand-made look, and more, are perfect for adding a touch of elegance and style to any room in your home or commercial space. We provide tile selection, design and sample services for all your tile needs. Contact us today and let us help you transform your space. Follow us on social media for the latest tile trends and inspiration. Proudly serving the Gold Coast and Brisbane.

Voted Best Tile Showroom, Nerang Tiles hosts one of the largest Australian tile showrooms displaying thousands of floor tiles and wall tiles at discount prices at its Gold Coast Tile Showroom.

The Nerang Tiles Website is a gallery snapshot only. Displaying a sneak preview of the thousands of tiles on display at its Gold Coast Tile Showroom. Visit in store to see the full range and take advantage of the Nerang Tiles expert team.

Nerang Tiles is a one stop tile showroom, providing colour and design consultation to assist builders, architects, retail and interior designers tile all areas from floors, walls, bathrooms, kitchens, pools, outdoor areas, offices to driveways.

Showcasing the latest in tile design and interior tile trends, including all classic and traditional tile designs, Nerang Tiles has it all. Some of the tiles available include tiles suitable as kitchen tiles, bathroom tiles, floor tiles, wall tiles, outdoor tiles, pool tiles, feature tiles and much more.

Tile Types available at Nerang Tiles: Bathroom Tiles, Kitchen Tiles, Pool Tiles, Outdoor Tiles, Wall Tiles, Floor Tiles, Feature Tiles, Timber Look Tiles, Marble Look Tiles, Stone Look Tiles, Concrete Look Tiles, Pattern Tiles, Mosaic Tiles, Stone Veneer Cladding, Cladding Tiles, Brick Look Tiles, Subway Tiles, Talavera Tiles, Capping Tiles, Listello Tiles, Pencil Tiles, Vinyl Tiles, Safety Tiles, Geometric Tiles, Tessellated Tiles, Mercatto Tiles, Terracotta Tiles, Anti Slip Tiles, Commercial Tiles, Textured Tiles, Sealed Tiles, Structured Tiles, Scored Tiles, Pressed Edge Tiles, Rectified Tiles, Vitrified Tiles, Step Tread Tiles, Coving Tiles, Bullnosed Tiles, Glazed Tiles, Bejmat Tiles, Zellige Tiles, Kit Kat Tiles, Finger Tiles, Unglazed Tiles, Floral Tiles, French Pattern Tiles, Terrazzo Look Tiles, Glow in the dark Tiles, Glass Tiles, Encaustic Tiles, Mosaic Tile Murals, Pool Mosaic Murals, Porcelain Paver Tiles and much more.

You are sure to be smiling doing your tiling when you shop at Nerang Tiles.

Find more tile inspiration for your wall tiling or floor tiling through the Nerang Tiles' Pinterest Page, Instagram Page, Houzz Profile or Facebook Page. The Nerang Tiles Social Media pages are constantly updated with new tiles arriving in store and designed inspiration from tile factories and customers for our viewing pleasure.

*Photos are an indication of colour only. Actual goods may vary from images shown due to device display settings, product batch variations and fine detail, and may not be available. Please contact Nerang Tiles to check availability, request samples or view display items .

Information on this website is to be used as a guide only and should not be taken to constitute current professional advice or a formal recommendation and we exclude all representation and warranties in relation to the content of this website. All consumers should seek professional advice through their local Builder's Association for specific, current and individual application.

Jill batty

6/5/2016 03:58:24 pm

If tiling over old tiles do you have to use the same size tiles??

Nerang Tiles

6/5/2016 07:35:15 pm

Not necessarily. It will depend on the condition of your existing tiles as to whether you can go larger or stay the same/go smaller. Many people opt to use a different size.

Vince

6/7/2023 10:14:52 pm

Hi
I have chipped tiles in my shower, the builder said that if he takes the tiles off he must re waterproof the shower, is it right? If so do you suggest to retile on top of the old tiles?

6/8/2023 09:10:18 am

Vince

Tiling on top of tiles is recommended when it is possible to do so.

This means that the tiles underneath must be in good condition and free from defects that may cause any additional tiles to crack, move or pop.

Tiling over tiles is generally a more economical method than reapplying waterproofing and removing existing tiles.

We recommend seeking advice from a local installer.

Nerang Tiles

Robert

9/26/2016 06:08:59 pm

Hello. Is there a product i can paint over the existing porcelain tiles to avoid having to scratch the surface? I would like to lay porcelain over the existing porcelain tiles. Thanks

Nerang Tiles link

9/27/2016 07:35:41 am

Robert, there are many different solvent based primers that you can use to etch out the surface of the existing tiles that enable and improve the adhesion of a wide range of coatings, waterproofing membranes and tile adhesives over non-absorbent surfaces such as porcelain tiles.

Examples of this are Eco Prep & Prime or Ultra Prime.

I would suggest visiting the staff at Nerang Tiles or your local tile store to inquire about the different products available and which one would best suit your surface and budget requirements.

mark link

11/30/2016 07:46:27 am

Can I lay cement sheet on top the floor tiles. If so what glue should I use. Goal is then to lay floor boards on-top of the cement sheet.
I had hoped that laying the cement sheet will provide a new level base, as well as raise the floor up to a deserted height

11/30/2016 08:07:09 am

Hi Mark, yes you can lay cement sheet on top of any floor tiles. A rubber based or rubber polymodified glue should do the trick.

Like with any flooring, just ensure that your base (tiles) are in good condition to accommodate a flat surface layer being added to it.

You will also need to consider waterproofing, as cement sheeting is porous and liquid can build up between the existing tiles and your new flooring which can damage both the adhesive and the cement sheeting.

Important Tip: If you're planning to raise your floor levels to accommodate new flooring and different floor levels, please ensure that your ceiling heights, skirtings, cupboards and door hinges will comply can accommodate the new heights to avoid both trip hazards and so that all doors can be opened.

Nerang Tiles

Erik Donkers

12/23/2016 04:08:36 pm

When tiling over tiles , how do you get around the taps being deeper recessed. I've seen tap extensions but even the shortest ones are too long.

12/28/2016 07:52:55 am

Hi Erik

This questions is best directed at a plumber, however we would recommend purchasing a longer than required tap extension and if possible use an angle grinder to shave it back or cut it to its required length while using silicone and the recommended adhesive to connect your piping back together.

Nerang Tiles

Igor

12/27/2016 07:48:43 am

I have stripped the walls down in the shower but i am considering keeping the shower floor tiles and tiling over them.

I am waterproofing the walls again and considering waterproofing again over the old floor tiles. Would you recommend this ?

12/28/2016 07:58:19 am

Nerang Tiles would always recommend removing existing floor tiles where possible to ensure the best result. However where it is not possible to remove existing floor tiles then you should treat the old floor tiles as you would a new substrate (concrete slab).

Davco Adhesives has some great DIY Youtube videos on how to waterproof and prime for the laying of tiles.

The tiles should be primed and waterproofed just as you would a new slab of concrete. However this will all depend on the quality of your existing floor tiles, if they are drummy or coming off in any way then you should first look at removing them as this will effect any tiles laid on the existing floor tiles.

Nerang Tiles.

4/21/2017 06:42:11 am

Hi
Ours is a 1969 house with wood subfloor, the kitchen floor tiles are original. So i am assuming they are the very thin vinyl asbestos tiles.. They look like the shopping centre tiles.. The underlay looks like wood/plywood..Would u recommend using cement sheet on top and then laying tiles or directly laying new tiles? just thinking about future renos and demos, dont want it to be a asbestos hazard.. what is the general trade practice in these situations?

Nerang tiles link

4/21/2017 10:40:45 am

SK

General practice would be to remove any asbestos sheeting in a safe and secure manner before doing any work on the materials. Applying any materials to the surface could damage or cause asbestos to free itself when removing the existing vinyl tiles resulting in a health hazard.

We are not aware of vinyl containing asbestos however if this is the case we would recommend the above.

Otherwise a a professional tiler should be able to quote on and advise on the best practice and method for laying tiles.

9/19/2020 03:35:00 pm

In my area asbestos was commonly used in the adhesive under the lino... which was not common in other places I'd lived where you could easily lift lino to reveal lovely wooden floors. Asbestos was popular here as there was a big fire in the 30s and it was mined locally and cheap. It turned out to not be that difficult to have it removed. It cost $30 a sq metre and was a simple day job, all properly contained, vacuumed, sprayed down and removed by a certified asbestos remover. We went out for the day and came back to it all removed.

Aaron

6/21/2017 06:56:43 pm

Hi can you tell me if I'm laying tiles over tiles and floor and walls are in good sound condition is it necessary to water proof and does this need to be completed by a licensed water proofed.?

david

7/24/2017 10:42:20 pm

Hi, i only renovated my bathroom 4 years ago and am really unhappy with the type of tile that was used on the floor , i want to re-tile over the existing tiles with a smaller tile, normally the wall tile sits over the floor tile, should all the bottom rows of the wall tile come off or can you butt the floor tile against the wall tile?

7/25/2017 07:18:18 am

Aaron - Your tiler should be able to advise you as to whether the tiles are in good condition and you should also have the tiles waterproofed by a licensed professional.

David - Yes you can have your floor tiles join to the existing wall tiles with either a grout or silicone joint.

Rebecca link

10/29/2017 06:56:12 pm

Hi,
We are interested in tiling over our exisiting bathroom tiles however, besides making sure the door still works is there an other issue with the floor being a little bit higher?
We want to do this is both our ensuite and main bathroom.
Also we are considering painting over the wall tiles in the shower to save money, are there any issues with the waterproofing or peeling of this method?
Thanks

10/30/2017 08:18:26 am

Hi Rebecca

When tiling over existing tiles there are three main considerations in terms of the height of the tiles that you need to be attentive too. These include the height of the doors, the height of your skirtings and the adjoining floor coverings to the other room / hallway.

There are two important components to painting ceramic tile—preparing the surface properly and using the right type of paint. The most important steps are cleaning the tile then sanding it down perhaps with a fine (180-220 grit) synthetic grit sandpaper, such as silicon carbide or aluminum oxide, to take the gloss off the glazed surface. After dusting the bathroom and cleaning any residue form the tiles you can then paint your tiles using a latex or epoxy paint.

Hope this information helps.

Ananda link

11/10/2017 07:22:14 pm

We have developed a Product which can be used over any tiles to waterproof the same surface.
No need to remove any tiles even its 7 to 10 years old
Time required to work is just 3hrs and after that one can start re using toilet or bathroom etc.
Brand name Watershield
Manufactured By Protect Infrastructure Systems Pvt Ltd
Bangalore
Contact 08041460043

Rebecca

4/10/2018 05:58:24 am

If tiling over floor tile how is the step at the door finished to neatly cover the two layers of tile?

4/10/2018 07:59:48 am

Hi Rebecca, this is a very common solution: https://www.google.com.au/search?tbm=isch&sa=1&ei=DOLLWtzxJoOB8gXjv5nQCQ&q=tile+transition+trim&oq=tile+transition+trim&gs_l=psy-ab.3..0l10.15994.20913.0.21114.26.17.0.2.2.0.311.1796.0j1j5j1.7.0....0...1c.1.64.psy-ab..19.7.1241...0i67k1.0.raLxjfjhB4Q#imgrc=-70JgZ5jntzzgM:

Cass

4/10/2018 05:45:55 pm

I have a late 1960's house with pink tiles and bath tub. I plan to paint the tiles and tub but the floor tiles are those small rectangle ones with a bit of a rough surface. Would it be ok to tile over them instead of trying to pull them up?.

4/11/2018 08:11:34 am

Hi Cass

In most cases yes it will be fine to tile over your existing floor tiles. However it will depend on the condition of your tiles and substrate. Ask a tiler for their visual opinion on the condition of your tiles and their condition before beginning installation works.

Cleo williams

4/12/2018 12:25:41 pm

Our building block is 35 yrs old, in other words so are the floor and wall tiles. Can we put tile on tile on floor? We would like to replace it with bigger tiles. Shower recess is very old so we need new ones with just glass. We would like to have new wall tiles as well. Replacing vanity top and basin. New tap wares.

4/12/2018 01:14:37 pm

Hi Cleo, you can tile over existing tiles but it will depend on the their condition and height allowance for existing skirting and doorways. If any of your tiles are cracked or drummy then we recommend not tiling over the existing floor tiles. We recommend having a tiler inspect the site to be renovated or builder give you a quote as it seems like you are planning a complete renovation.

Paul

7/1/2018 09:03:55 am

Hi i have a high set timber house the shower has a leak will tiling over the tiles fix the leak have had the area treated fix it just to a very small drip under the house

Clare

7/22/2018 01:08:07 pm

Hi. If tiling over existing tiles, the floor waste will be recessed. How can this be resolved? Thanks in advance.

Clare link

7/23/2018 07:33:00 am

Hi Clare, most plumbers and tilers qualified to do so will use another flange and attach this to the existing piping to increase the height. However it is best to check with your plumber before doing so.

Neely

9/7/2018 05:21:51 pm

Can you tile over a rubber floor tile??

David Bajolek link

9/8/2018 08:52:32 am

Hi Neely, We don't see why not. It would be the same as tiling over waterproof underlayment membranes like Ditra from Schluter Systems or Sound Zero from Davco.

Kinjal Mistry

9/21/2018 04:02:43 pm

Installing Tiles over any Existing Flooring will increasing dead load? Will it not debond? or how to bond it?

9/22/2018 10:13:46 am

Hi Kinjal

There are many different bonding solutions and adhesives available for installing over tiles, speak to your tiler or local tile store for more information. Of course installing tiles will increase the load. Flooring, like all fixtures both structural and non structural will account for the non dynamic weight and permanent force on any structure.

Pioneer Bricks link

2/14/2019 07:07:00 pm

Very Informative post.
Browse the best tile design at Pioneer Bricks.

Maxime Interactive link

8/2/2019 06:50:19 am

very helpful

Shaylee Packer link

2/8/2020 12:05:34 am

We are looking to put new tile in our bathroom. As you mentioned, it would be alright to place the new tile over the existing tile if there isn't anything wrong with the old tile. For the most part, the existing tile is in good condition, but there is one part that has a chip in it. Would this make it so that we have to take out all of the old tile first?

2/8/2020 08:51:43 am

Hi Shaylee

The chip should not affect tile over tile. If it does worry you, you can fix the chip using a product called TileFix (see here https://www.nerangtiles.com.au/store/p172/MagicEzyTileFixStarterKit.html)

Nerang Tiles

Pollyanna Jones

2/29/2020 06:28:43 pm

Hi,

I am wanting to tile over my existing wall and floor tiles. The wall tiles only come up to the height of the shower, but I would like my new tiles to go to the ceiling. Do have any advice on how to level the wall surface to fill in the gap where there is only drywall?

Thank you
Polly

3/2/2020 07:59:56 am

Pollyanna

This gap can be and would commonly be built up using a strong flexible rubber based adhesive.

Nerang Tiles

3/2/2020 02:29:43 pm

Thank you

Stephanie

6/5/2020 11:03:38 pm

Looking at tile over tile for a bathroom and shower when replacing vanity/toilet as a cheaper option but 2 tiles are cracked infront of vanity with no hollowing and are level. The terracotta colour under the porcelain can be seen on some tile edges in shower along with one that has starting breaking away ontop. Is it possible to still tile over with a little more prep work?

6/6/2020 08:27:07 am

Hi Stephanie

If parts of the existing tiles are chipping away or cracking then this will continue when you tile over. This means the new tiles and adhesive will adhere to broken or loose pieces and cause further issues.

You will need to identify the issue as to why they are cracking and chipping or remove those tiles and build up a bedding of sand and cement to level with the floor.

Then you can tile over and tile over the other tiles if they are in good condition.

Nerang Tiles

Staplers NZ link

8/26/2020 09:35:12 pm

It is a wonderful article stating about how can you tile over existing tiles.This article is very helpful. This article mentions and acts as such a moving trigger. It is an article worth applauding for based on its content. This is a great post; I will share as much as I can. Come across sifco.co.nz/staplers/electronic-staplers and hope you can visit this too to get more information.

Framing Nail Gun link

9/9/2020 09:10:39 pm

It is beautiful article stating about can you tile over existing tiles. I am really happy to come across this exceptionally well written content. Thanks for sharing and look for more in future! Great points!! I love this blog; please keep updated us with such information.

Alex Cooks link

12/3/2020 10:32:39 am

Hi nicce reading your post

Jac

3/22/2021 02:37:04 pm

If tiling over tiles and there's one room that has carpet which would be replaced with the tiles how do you get the level the same? Thank you

3/22/2021 02:50:48 pm

Jac

By either using a sand and cement bedding or packing the area with additional adhesive. This would be based on a decision by your tiler specific to your situation.

Nerang Tiles

John

3/29/2021 11:29:16 am

Hi,
can I over-tile a bathroom (wall and floor) that was built before waterproofing was required?
...or do I need to waterproof BEFORE I overtile?
Thanks for your reply

3/29/2021 11:36:12 am

John

It is highly recommended to waterproof wet areas.

Tile over tile application is dependant on the quality of the existing tiles as to whether tile over tile installation is possible.

For specific waterproofing requirements you should seek advice from a qualified person or your local building authority for your wet area.

Nerang Tiles

Carl

6/24/2021 02:20:11 am

I had a question if I were to tile over existing tile in my bathroom. The old tile is level and all seems well, but my concern is about weight of the new tile over the old tile. Is there a weight requirement I should stay under? And how would I find out the weight of my bathroom currently? My master bath is 17.5ft x 12ft

6/24/2021 08:42:26 am

Carl

We are not aware of any weight limits for tiles that would be exceeded by any type of flooring.

It is not possible to know the weight of your current tiles without knowing the tile type and make. A a general rule, 10mm porcelain tiles will weight 20-22 kg per sqm excluding joints. This weight will differ depending on the thickness, tile material etc.

Nerang Tiles

Mila Stauffer link

7/13/2021 03:44:13 pm

Great!
I was finding the right platform from where i can get easy ideas to renovate my home with stylish tiles. This is the perfect blog post! I feel very happy after reading your blog post!

John Cummings

12/4/2021 03:18:50 pm

I have just finished tiling bathroom floor but the tiles i bought are so thin when you walk on them they brake I have just purchased a lot thicker tile the same size can I lay the new ones over the exisiting tiles thank you

12/7/2021 09:21:07 am

John

Please see advice in the article above

" If your old tiles are loose, drummy, lifting, uneven or damaged
If your tiles are damaged or drummy, this means that any flooring or wall material placed on top of the existing tiles will have the same issues. Tiling over these inadequate tiles will just be covering the issues for a short period of time "

It is likely that your tiles or installation is defective or wall specific or another tile that is inappropriate for flooring applications has been installed.

We do not recommend installing tiles over loose, drummy, cracked, defective or damaged tiles. The issue with the underlining substrate should be found and corrected.

Please seek advice from a professional tiler or your local tile store.

Nerang Tiles

CON KALABOUKAS

2/7/2022 10:33:12 am

Is it better if I tile, wall and floor,over small tiles (15x15)with larger tiles (30x40) so as to avoid any issues with with some of the smaller tiles sounding hollow? Reason is if a smaller tile becomes unstuck the larger tile will still be glued to the other smaller tiles

2/7/2022 11:19:49 am

Con

We recommend installing any size format using proper installation techniques and back buttering adhesive. This formal techniques places adhesive across the entire surface area of a tile.

If there are hollow or drummy tiles we do not recommend installing tile on tile if there is an underlining issues to the existing tiles.

Nerang Tiles

Access Doors and Panels link

4/6/2022 04:35:44 pm

Your post addressed all of the pertinent issues, and it seems wonderful and useful. Keep up the wonderful work!

Kalai

4/23/2022 12:28:37 am

Hi, last week we renovated our home with new porcelain tiles on top of old tile. After finishing the work, I walked on the tile and noticed that the edges of most of the tiles are hurting my foot. When I touch and feel the new tiles, it's edges are sharp and little bit uneven with the nearby tiles. 60% of tiles are like this. What should we do to fix this? The tile installer says it is normal in rectified porcelain tiles. Buy I can't walk without a footwear inside home. Please give remedy for this

4/23/2022 08:55:38 am

Kalai

Thank you for your comments.

It sounds like their is lippage with your tiles. Please see more information here: https://www.nerangtiles.com.au/why-are-some-of-my-tiles-uneven.html

Nerang Tiles

Natalie

7/1/2022 08:24:11 pm

Thank you for this post! If you tile over existing (good condition) tiles that only go half way up a wall, what do you use to hide the 2 layers of tiles? Is there thick capping or any tricks of the trade?

Thank you in advance ☺️

7/2/2022 08:36:22 am

Natalie

Capping tiles are a great solution.

Nerang Tiles

Grant Bee

1/21/2023 09:09:33 pm

Awesome article and very helpful

Ella G. Mora link

5/9/2023 04:24:13 pm

Your explanation of the benefits of tiling over existing tiles, such as the time and cost savings, was particularly helpful. It's great to know that this is a more efficient option that can still produce high-quality results.

Martyna

8/6/2023 09:03:47 pm

Super informative post and lots of good questions in comments. One thing I am unable to find information on online is that fall in the floor to waste - how is that dealth with when laying tiile over tile? Are the new tiles cut in places and angled to help form the fall? My guess is the old floor waste drain needs to be removed and an new one put in too to adjust for the new floor height difference? This is for laundry and separate WC room. Old tiles in good condition. Thank you

8/7/2023 08:01:38 am

Martyna

You are correct. The tiles would be angled and a new floor waste or panel flange would be used.

Nerang Tiles

Gary Smith link

11/21/2023 02:57:15 pm

Hi, I want to renovate my bathroom (wall and floor) that was built before. Is waterproofing was required?

11/21/2023 03:42:56 pm

All wet areas require waterproofing.

Nerang Tiles

homeappliancerepairs link

3/15/2024 01:09:30 am

Home Appliances Repairs has been the ultimate provider of all your home appliance complications for decades. You might have heard about us as Gurgaon’s most trusted doorstep Home appliance repair and maintenance company.

Home Appliances Repair Gurgaon link

8/14/2024 01:48:55 am

homeappliancerepairgurgaon link

8/14/2024 01:54:05 am

Home Appliance Repair Gurgaon is Gurgaon's best doorstep home appliances repair and maintenance service provider. Our experienced technicians provide the highest quality of work and provide the best customer experience.