Andal Tile Leveling Floor System - 1mm Clips - 50 Pieces
Born in the State but delocalised in Italy, this tile levelling system includes a clip and a wedge that can be used at any skill level, with no additional tools to install or remove it.
The special anchor clip haas mayn benefits. These include. it aligns tiles of different thickness, it installs tiles flat on irregular ground, it installs with a minimum grout joint of 2mm, it installs tiles from 8 to 12 mm thickness.
How to use
Slide two clips under the tile and into the mortar approximately 2mm from each end of the tile. According to the tile size, add more clips on each side of the tile.
Place the second tile.
Slide the reusable wedges into the hole at the top of the clip, pushing it as tight as possible.
To facilitate this operation, use the optional traction adjustable pliers. Check for the alignment of the grout joints and move on to the next tile.
No special removal toools are required.
Once the mortar is set, simply kick the clips in the same direction as the grout joints and it will break off at the base.
Go through and pick up all the wedges, which are reusable several times.
For your next project, you will only need to purchase more clips.
Tile size requirements
300/300 need 44 pc
450 /450 need 20 pc
300/600 need 22 pc
600/600 need 11 pc
450/900 need 12 pc
600/1200 need 8 pc